MAIN LINKS

About this site
Published Journals
Call for Papers
Guide for Authors
Subscription
RSCE
Contact Us
Home

 

 

 

 

Published Journals

Current Issue

 

ASEAN Journal of Chemical Engineering, Vol. 5, No. 2, December 2005

Effect of Ultrasonic During Preparation on Cu-Based Catalyst Performance for Hydrogenation of CO2 to Methanol
M Nasikin, A Wahid

111-115

An Interesting Final-Year Undergraduate Project: Investigation of Gypsum Scale Formation on Piping Surfaces
S. Muryanto, H. M. Ang

116-124

Utilization of Mathematical Software Packages In Chemical Engineering ResearchSynthesis of Robust Water Reuse Networks Using Fuzzy Nonlinear Programming: Mass Exchange-Based Processes
Ang Wang Lee, Nayef Mohamed Ghasem, Mohamed Azlan Hussain

125-130

Photodegradation Kinetics of Phenol and Methylene Blue Dye In Water Stream Over Immobilized Film TiO2 Catalyst
Chin Mei Ling, Abdul Rahman, Mohamed Subhash Bhatia

131-139

Ranking of Waste Management Options Under Conditions Of Possibilistic Uncertainty Using Fuzzy SAW
Raymond Girard R. Tan

140-146

NO Reduction by Carbon Monoxide Over Cobalt on Zeolite Beta
Jatuporn Wittayakun, Nurak Grisdanurak, Banjamart Nuntaitawegon
Gerald Kinger, Hannelore Vinek

147-155

Effect of Basis Sets on the Selection of the Appropriate Level of Theory Toward the Development of Quantum-Based Force Field Equation for Ionic Liquids
A. N. Soriano, B. T. Doma, Jr.

156-160

Integrating Performance Indicators Into the Audit of Satety Management Systems
C. R. Che Hassan, M. J. Pitt, A. J. Wilday

161-168

Kinetic Consideration of Clinker Formation in Portland Cement Production Using Demolition Rubbles (Concrete, Mortar, and Plaster), Part I. Burning Ability of Raw Mixes
Sumardi P., Ida Bagus Agra, I. Made Bendiyasa, Wahyudi Budi Sediawan

169-175

Propane Dehydrogenation in a Modified Porous Membrane Reactor For Producing Propylene with Chemical and Polymer Grades
Azis Trianto, Yazid Bindar, Noezran

176

 

 

ASEAN Journal of Chemical Engineering, Vol. 5, No. 1, June 2005

Comparison of Steady State and Dynamic Interaction Measurements in Multiloop Control Systems
Renanto Handogo, Avon T. H., and Joko Lelono

1–15

Simulation of Ethyl Tert- Butyl Ether Production from Tert-Butyl Alcohol and Ethanol in Reactive Distillation
S. Assabumrungrat, V. Pavarajarn, D. Wongwattanasate, P. Praserthdam, and S. Goto

16–21

Synthesis of Robust Water Reuse Networks Using Fuzzy Nonlinear Programming: Mass Exchange-Based Processes
Raymond Girard R. Tan and Dennis E. Cruz

22–29

Water Plasma Generation Under Atmospheric Pressure for Waste Treatment
Takayuki Watanabe

30–34

Hydrogen Production from Synthesis Gas Using the Photosynthetic Bacterium Rhodospirillum rubrum
G. Najafpour, H. Younesi, and KuSyhidah Ku Ismail

35–44

Kinetic Parameters Determination of Benzene Vapor Adsorption on Activated Carbon Using Differential Permeation Technique
Aswati Mindaryani, Boma W. Tyoso, Wahyudi Sediawan, and Supranto

45–51

Removal of Dyes by Aqueous Mixed Coagulants
Peik Yin Ooi, Tjoon Tow Teng, A. K. Mohd. Omar, and N. A. R. Nik Norulaini

52–64

Mathematical Model for the Prediction of Gas–Liquid Mass Transfer in Airlift Contactors
P. Pavasant, P. Wongsuchoto, and V. Suksoir

65–75

Enhancement Effect of Hydrogen Sulfide Over Metal Ion-Exchange Mesoporous Silicate FSM–16 for Acid-Catalyzed Reactions
Lebong Andalaluna and Masatoshi Sugioka

76–83

Application of Evidence Theory to Automate the Process of Removing Toxic Chromium Ions in Wastewater
M. M. Mustafa, S. A. S. Rozaimah, and R. A. Rakmi

84–98

 

ASEAN Journal of Chemical Engineering, Vol. 4, No. 2, December 2004

The second issue of volume 4, which features 10 papers, marks the first time that AJChE comes out with two issues in one year—a glowing sign that research in the Region is very much active and dynamically developing.

 

Gas–Liquid Mass Transfer Investigation in Continuous Oscillatory Flow in a Baffled Column
Taslim and Mohd. Sobri Takriff

1–6

Buffering Capability of b-chloropropionic Acid–Sodium b-chloropropionate System in Acidic Geothermal Brine
Yolanda P. Brondial

7–15

Optimization of 5-kW Mobile and Portable PEMFC System via Energy Integration
Siti Kartom Kamarudin, Wan Ramli Wan Daud, Ayub Md. Som, Ir. Abdul Wahab Mohammad, and Mohd. Sobri Takriff

16–23

Separation of Nickel from Plating Solution by Sulfuration Treatment
T. Fukuta, T. Ito, K. Sawada, Yoshihiro Kojima, Eileen C. Bernardo, Hitoki Matsuda, K. Yagishita

24–31

Maximizing Energy Efficiency and Minimizing Environmental Emissions in the Process Industries Using Thermal Pinch Analysis
Zainuddin A. Manan

32–39

Utilization of Sugars in Hydrolysate from Oil Palm Empty Fruit Bunches for Ethanol-Fermentation Using Pichia stipitis CBS 5773
Herri Susanto and Achmad Ali Syamsuriputra

40–47

Coagulation–Adsorption of Suspended Solids and Residual Oil from Palm Oil Mill Effluent Using Chitosan
Abdul Latif bin Ahmad, S. Sumathi, and Bassim H. Hameed

48–57

Heavy Metals Characterization of Sludge from a Philippine Recycling Paper Mill
Lorraine A. Carrillo and Susan M. Gallardo

58–65

Performance of Chromium-Exchange Zeolite Catalysts in the Decomposition of Volatile Organic Compound Pollutants
Ahmad Zuhairi Abdullah, Mohamad Zailani Abu Bakar, and Subhash Bhatia

66–75

Modelling as an Aid to Biomass Combustion in Plant Design
Michael R. I. Purvis, Gilbert Lim, Susan A. Roces, Carlito M. Salazar, Raymund Girard R. Tan, and Stanley Santos

76–83

 

ASEAN Journal of Chemical Engineering, Vol. 4, No. 1, June 2004

The first issue of volume 4 features 11 papers.

 

Periodic Operation of Reactive Distillation for Dehydrogenation of 2–Propanol
Shigeo Goto, Kenta Hori, Leonila C. Abella, and Pag-asa D. Gaspillo

1–7

A Neat Way to Calculate Gas Velocity from the Ergun Equation in a Packed Bed
Thomas S. Y. Choong, William R. Paterson, and David M. Scott

8–10

Production of Polyhdroxyalkanoates from Synthetic Wastewater Using Sequencing Batch Reactors in On–Off Sequences
Tjandra Setiadi, Herriyanto Ronny Sondjaja, and Bambang Veriansyah

11–18

Promoted Selective Non-Catalytic Reduction: Prospective Technology for Nitrogen Oxide Reduction
Khandoker Abul Hossain, Mohammad Nazri Mohd-Jaafar, and Farid Nasir Ani

19–24

A Proposed Surface Area Measurement Module for Rural Folks: Design Concept and Trial Setup
Woraratana Pattaraprakorn, Makoto Tono, and Hiroo Niiyama

25–32

Net Energy and Carbon Flow Analyses of Four Pathways for the Utilization of Natural Gas as Automotive Fuel
Raymond Girard R. Tan and Alvin B. Culaba

33–38

Steady State and Dynamic Interaction Analysis in a Multivariable Control System
Renanto Handogo, Gebe Wibawa, Totong Rusmana, and Moch. Arief Hidayat

39–46

Biodegration of Polychlorinated Biphenyls Using Acclimatized Biofilm in a Three-Phase Fluidized Bed Aerobic Reactor
Joseph Auresenia and Donna Marie G. Taleon

47–54

Process Synthesis: Design for Improved Effectiveness
Duncan M. Fraser

55–63

Measurement and Prediction of Densities of Ternary Aqueous Mixtures Involving Sodium Polyacrylate
Z. A. Noor Fadzlina, T. T. Teng, and M. A. Rahman

64–69

Adsorption Isotherms for Phenol Onto Activated Carbon
Hawaiah Imam Maarof, Bassim H. Hameed, and Abdul Latif Ahmad

70–76

 

ASEAN Journal of Chemical Engineering, Vol. 3, No. 1, December 2003

 

Application of Autotrophic Denitrification to Nitrate-Contaminated Industrial Wastewater
Rudi Nugroho, Hirokazu Takanashi, Makoto Hirata, and Tadashi Hano

1–8

Steam Reforming of Methanol Over Cu/Al2O3/ZnO Catalysts
Somchai Akaratiwa and Tammanoon Udomman

9–13

Effect of pH on Growth, Spore Production, and Spore Viability of Biocontrol Agent Trichoderma harzianum in Submerged Fermentation
Syahiddin Dahlan Said, Masitah Hassan, and K. B. Ramachandran

14–18

Kinetic Analysis of Phenol Biodegration by Isolated Bacteria and Mixed Culture by Cells Immobilized on Loofa (Luffa cylindrica) Sponge in Airlift Bioreactor
Faisal, Yasunori Tanji, and Hajime Unno

19–25

Avoiding Chaotic Instability Under PID Control of Plyethylene Fluidized Bed Reactor (UNIPOL Process)

Nayef Mohamed Ghasem and Mohamed Azlan Hussain

26–33

Characterization of Titania (TiO2) Catalysts Prepared by Sol–Gel Method
Marwan, Akifumi Ueno, Naoto Azuma, Akinori Maezawa, and Shigeo Uchida

34–46

 

ASEAN Journal of Chemical Engineering, Vol. 2, No. 1, September 2002
This second volume features 13 papers presented during the Regional Symposium on Chemical Engineering Conference in Indonesia held on October 11, 2001.

 

Rotating Biological Contactor for Biological Treatment of Poultry Processing Plant Wastewater Using Saccharomyces cervisiae
Ghasem D. Najafpour, Punita Nook Naidu, and Azlina Harun Kamaruddin

1–6

Gas Holdup and Gas–Liquid Mass Transfer Investigations in an Oscillatory Baffled Column
Taslim and Mohd. Sobri Takriff

7–14

Application of Draft Tube in the Reduction of Backmixing Rate in Oscillatory Flow in a Baffled Column
Mohd. Sobri Takriff and Zuhrina Masyitah

15–20

Sensitivity Analysis of the Life-Cycle Inventories of Electricity and Hydrogen as Energy Vectors for the Philippine Automotive Transport Sector
Raymond Girard R. Tan and Alvin B. Culaba

21–29

An Improved Method to Calculate the Conservation of Mass in the Simulation of Rapid Pressurization and Depressurization in a Packed Bed
Thomas S. Y. Choong, William R. Paterson, and David M. Scott

30–37

CO Oxidation Over Metal Oxide Catalyst Supported by Indonesian Natural Zeolite
Suryo Purwono

38–46

Oscillatory Flow Mixer for Pulp Bleaching
Taslim and Mohd. Sobri Takriff

47–54

Deagglomeration of High Purity Fine Alumina Powder Via pH Control
Andanastuti Muchtar, Norazmira Wati, and Nor Azri Jaafar

55–60

Reduction of No x Emission from Gas Turbine Combustor Applying Fuel-Staged Combustion
Mohammad Nazri Mohd. Jaafar

61–66

Effects of Shear Rate on Morphology and Gas Separation Performance as Asymmetric Polysulfate Membranes
Ahmad Fauzi Ismail and Lai Ping Yean

67–74

A Review on Fuel Cell as Advanced Power Source
S. K. Kamarudin, W. R. W. Daud, M. S. Ayub, A. W. Mohammad, S. Takriff, and S. E. Iyuke

75–86

Measuring and Modeling the Performance of Rigid Ceramic Filters
T. G. Chuah and J. P. K. Seville

87–96

Use of the Taguchi Design of Experiments to Optimize the Parameters of Cleaning Machines for Sensitive Plastic Products
Sherwin Celestino and Joseph Auresenia

97–106

 

ASEAN Journal of Chemical Engineering, Vol. 1, No. 1, October 2001
The maiden issue features articles on the development of chemical industries in ASEAN countries topbilled by Professors Junjiro Kawasaki and Hiroo Niiyama, primemovers of the Regional Symposium on Chemical Engineering (RSCE).

 

From the Regional Symposium to Our Own Journal Publication: For the Sound Development of Chemical Engineering in ASEAN Hiroo Niiyama

1–6

Overview of Petrochemical Based Industries in Malaysia
Mohamad Roji Sarmidi, Ramlan Aziz , Mohammed Azlan Hussain, and Wan Ramli Wan Daud

7–16

Natural Gas Reform Policies for the Development of Indonesian Chemical & Petrochemical Industries: Proposals and Recommendations
Triharyo I. Soesillo and Fazilet Maskan

17–23

The Development of Chemical Industries in the Philippines
Servillano S. B. Olaño, Jr.

24–38

Economic Crisis and Its Impact: Chemical Industry in Thailand Pailin Chucottaworn

39–43

 

Best viewed with MS Internet Explorer 5.5 and above or Netscape Gecko Series .
Set your video resolution to 800x600 pixels for best results.
Copyright©2004. All Rights Reserved. De La Salle University - Manila.
You may send your comments to the Web Development Team.